- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Aluminum Rear Bumper
- Ambush Series Rear Bumper
- Atlas Rear Bumper
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- Stainless Steel
- Weather Resistant
- Pair
- Hardware Included
- Limited 5 Year Warranty
- Classic Rock Crawling Rear Bumper
- Tubular w/Sheet Metal Design
- Keeps Bumper Weight To a Minimum
- Provides Superior Strength Over OEM Rear Bumper
- Tall Corners Keep The Lines Of The Vehicle
- Black Powder Coated
- Factory hitch must be removed
- Accommodates OEM Back up Sensors
- Includes LED Back Up Lights
- Mount Kit Sold Separately
- Popular Diamond Tread Design
- Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
- Downsize and Compact Are 350/3500 lb. Weights
- V5 Tested Certified To SAE J684
- Built In Step Pockets For Easy Bed Access
- OE Sensor Compatible
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Satin Black Finish
- Massive Recovery Hooks
- Built-In Jack Lifting Points
- Limited 5 Year Warranty
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Integrated 9-1/2in. Wide Stepping Surface
- Fleet-Approved Expanded Metal Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Dual A-Coat w/Gloss Black Powder Coat Finish
- Designed To Accept Parking Sensors
- Assembled In USA
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Spring-Loaded Shock-Absorbers Built Into The Mounting Brackets
- Integrated 9-1/2 in. Wide Stepping Surface
- Fleet-Approved Expanded Steel Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Universal Design With Vehicle-Specific Shock Assembly
- Made In Usa May Include Imported Hardware
- Provides A Stable Platform While Providing Max Towing Capacity
- Black Powdercoat Finish For Superior Corrosion Resistance
- Options Are Bolt On Receiver And Black Matte Finish
- Proudly Made In The USA
- Direct Fit
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Solid Mount D-Rings Welded On The Inside And Out
- Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
- Smittybilt Advantage Warranty
- M1A2 Modular Rear Bumper For 14-18 Chevy Silverado
- Form Fitted And Lightweight Design With A Modern - Futuristic Style
- 7-Gauge Smooth Steel With 12-Gauge Inserts / 1/4 in. Brackets And 3/4 in. Shackles
- Corrosion-Resistant / 3/5mm Thick - Carbide Black Powder Coat Finish
- Lightweight Yet Tough With Improved Strength Through Design And Fabrication
- Angled Wings For Increased Ground Clearance
- Perforated 12-Gauge Inserts Provide Protection To LED Lights
- Incorporates Spare Tire Lock Cover
- Enables Convenient Access To Factory Receiver Hitch
- Allows Re-Use Of OEM Trailer Plug Adapter
- OEM Style Steel Rear Bumper
- Mount Kit Included
- 2 In. Diameter Tube Frame
- Optional Class III/IV Hitch Available. Sold Separately
- Retractable License Plate Holder Conceals Receiver Hitch
- Equipped With Mount Points For Optional Auxiliary Lights
- Available For Vehicles With Or Without Backup Sensors
- Bolt-On Installation; No Drilling Required
- Truck Pal; Tailgate Ladder
- Complete Assembly
- Molded Polymer Step Pads
- V5 certified
- Interchangeable Components
- 3 Year Warranty
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Compatible For Blind Spot Monitors And Parking Sensors
- Accommodate For Oem Hitch And Led Back Up Lights
- Configured To Accept 2 Fm6 Led Flush Mount
- Custom Laser-Cut Westin Logo
- Hardware And Mounting Brackets Included
- Bolt-On Installation - No Drilling Required
- Rear Bumper
- 3/16 Inch Steel Plate Construction
- Bolt On Installation Includes Hardware
- Dual Shackle Plates For D-Rings Tie To Frame Rails
- License Plate Pocket Reuse OEM Lights
- Dual Process Black Powder Coat Finish
- Retain OEM Tow Hitch
- Can Mount TN-5293 Swing Arm Tire Carrier
- 3/16 in. Cold Rolled Steel Plate Construction
- Dual Shackle Plates Tie To Frame Brackets
- Will Allow For TC 5293 Swing Arm
- Stronger Then OEM Bumper
- Dual Process Black Powder Coat Finish
- Easy At Home Installation With Only Hand Tools
- Return OEM Tow Hitch
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- Direct Fit
- 2 And 4-Door Models
- Textured Black
- One-Piece Design
- Robotically Welded For Extreme Durability
- Pre-Cut Vertical Uprights For A Signature Look
- No Hitch
- 5 Year Limited Warranty
- Rear Bumper Light With Fog Light
- 3/16 in. Steel Plate
- Bumper Step For JT-2965
- Bolt-On Design
- Uses Factory Frame Mounting Holes For Extra Support
- Optional Bed Protector JT-5101
- Two-Stage Light Texture Finish In Black
- 3 Year Finish/Limited Lifetime Warranty
- Rear Bumper Step Pad
- Protects Rear Bumper From Loading/Unloading
- Restores Damaged Bumpers And Protects New Bumpers
- No Drill Installation
- Mounts With 3m Tape
- Made In Usa
- Robotically Welded To Exacting Specifications
- Black Dual Powdercoat with Zinc Undercoat
- Welded One Piece Design
- Attached to Factory Mount Points
- Extremely Durable
- Tire Carrier Takes Load Off Tailgate
- Fully Adjustable
- Semi Gloss Black Powder Coat Finish
- Secures With Heavy Duty Latch
- Custom Welded Shackle Mounts
- 1 in. D Rings Included
- Rear Steel Bumper
- Gloss Black
- Allows Oversized Spare Tire
- Welded End Caps
- Limited 5 Year Warranty
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Black
- Stamped Steel
- Fits Up To 7/8 in. D-Rings; Not Included
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- Full Width Bumper
- Stain Black Finish
- Center Bumper
- Works w/Factory JK Tow Hitch
- 6 Year Limited Warranty
- Easy Access To Factory Tow Hitch
- No Drill Installation
- Black Powder Coated
- Accommodates Factory Park Assist Sensors
- Durable Black Powdercoated
- Made From Formed Channel
- Diamond Plated Step Plates And Skirts
- Comes Standard With Backup/Work Lights
- Factory Receiver Must Be Retained
- Black Matte Finish Is An Option
- Proudly Made In The USA
- Raised corners for better entry and exit under the most extreme conditions
- Accommodates 3X3 Cube Led Lights
- Integrated 3/4 in. D-Ring Mounts
- Class Iii Receiver Hitch
- Integrated Jack Points
- Perfect Mid Width Design
- Direct Fit
- Two Stage Textured Black Powder Coat Finish
- Dense Zinc Treated Undercoating
- Expertly Robotically Welded
- Bumpers
- New solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
- Aux back up light cut out provided
- 3/16-inch cold rolled steel with two-stage textured matte black finish
- Powder coat finish 5 year limited warranty
- Smittybilt limited lifetime warranty
- Modular design; tire carrier can be added in the future.
- Class III hitch for true towing with towable d-ring
- Direct Fit
- Black Powder Coat
- Dense Zinc Treated Undercoating
- Two Stage Textured Black Powder Coat Finish
- Expertly Robotically Welded
- Bumpers Bolt Directly To Your Vehicle
- Bumper Is 2 in. X .120 in. Wall
- 2 in. Receiver Rated Class III 9;000 LBS.
- Standard Rear Bumper
- Not Vehicle Specific
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings With Light Provisions
- Integrated D-Ring and Lift Points
- Oe Fog Light Provision
- Integrated Overrider With 13 in. Lightbar Provision
- Cold Rolled Brite Steel
- OE Style Steel Step Plate
- Molded Polymer Surface
- Mount Kit Sold Separately
- 3 Year Warranty
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- Strong/ Lightweight And Rust-Free Hardened Aluminum Construction
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Center Section PN 2081001/ Corners PN 2081200
- Includes Brush Guard PN 2081205 And Mounting Hardware
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section Only
- LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
- Flood Beam Pattern w/2200-Lumen Output Each
- Cutouts And Mounting Tabs Allow For OE Lights
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section PN 2081020
- Includes Corners PN 2081222 And Mounting Hardware
- Shackle Rating Of 12500 lbs. For Off-Road Purpose
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Center Cutout For Rear Mount Trailer Hitch Receiver Tube
- Includes Mounting Hardware And 3/8 in. Thick Brackets
- Includes Bull Bar And Mounting Hardware
- Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors
- Includes 2 in. Receiver Tow Hitch Made Of 1/4 in. Steel Reinforced With 7/16 in. Right
- 3rd Brake Light Bracket Included
- Steel Welded Accessory Panel Allows For Mounting A Hi-Lift Jack Or Gas Can
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel
- RotoPax Mount
- 3/16-Inch Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points
- Rock Light Mount Points
- 2 Off-Road Jack Points
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- Bolt-on design for XRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one-handed opening operation; tuned to factory tailgate
- CB and jack mounts and Roto Pax® gas can holder
- Manufactured from 3/16 in. cold rolled steel
- Two-stage textured matte black finish
- 18-Current Wrangler JL; 2-4 Door
- Adjustable Slant Tire Carrier
- Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
- Included Adjustable 3rd Brake Light Bracket
- Retains OE Camera Location And Functionality
- Removable Trail Jack And Aerial Antenna Mount
- Steel Vent Cover
- Roller Bearing Pivot
- Fits Up To 40 in. Tire; With Single-Action Open And Close Feature
- Direct Fit
- 2 And 4-Door Models
- Two Stage Matte Black Textured Powder Coat Finish
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel
- High strength lightweight design
- Low Profile Winch Mount Improves Air Flow
- Integrated lightweight 10-gauge steel shell 4-gauge steel winch tray provides superior strength at an affordable price
- Features 4.5 x 10 in. winch mount pattern
- Accommodates Most Winches Up To 12000 lbs Capacity